This Item Has Been Added to Your Quote.


Reach forklift, 42' - Sky Track - 8042

Rental Rates
Description
Sky Trak Reach Forklift 8042

Features
  • 8,000 lb. (3630 kg) max. lift capacity and 41' 11" (12,7 m) max. lift height
  • Optional attachments for high versatility
  • Sealed bearings extend service intervals, lower maintenance costs
  • Re-designed cab for improved operator comfort and safety
  • 4-speed modulated transmission combined with high performance axles for increased production and maneuverability
  • Patented Stabil-TRAK load placement system increases operator comfort
  • Machine design eliminates the need for liquid filled tires
Features
Model 8042
Rated Capacity @ 24 in. (610 mm) Load Center 8,000 lb (3,629 kg)
Maximum Lift Height 41 ft 11 in. (12.78 m)
Capacity @ Maximum Lift Height 6,000 lb (2,722 kg)
Maximum Reach 26 ft 7 in. (8.10 m)
Capacity @ Maximum Reach 1,800 lb (816 kg)
Approximate Operating Weight 25,365 lb (11,506 kg)
Length (Less Forks) 225.2 in. (5.72 m)
Width 98.2 in. (2.49 m)
Height 99.4 in. (2.52 m)
Wheelbase 119.5 in. (3.03 m)
Outside Turning Radius 156 in. (3.96 m)
Ground Clearance 17.3 in. (439 mm)
Drive 4 x 4
Engine Cummins QSB4.5T
HP and RPM 110 hp @ 2,500 rpm
Transmission Powershift
Axle - Front High-Bias, Limited Slip
Axle - Rear Planetary
Steering All-Wheel
Tires 13:00 x 24 - 12 ply
Maximum Travel Speed 20 mph (32 kmph)
Frame Tilt Left/Right Frame Leveling ?10 Degrees





Rated lift capacities shown are with machine equipped with carriage and pallet forks. The machine must be level on a firm surface with undamaged, properly inflated tires. Machine specifications and stability are based on rated lift capacities at specific boom angles and boom lengths. (If specifications are critical, the proposed application should be discussed with your dealer.)
  • DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result.
  • DO NOT tip the machine forward to determine the allowable load.

Use only JLG approved attachments with proper material handler model/attachment load capacity charts displayed in the operator?s cab. OSHA requires all rough terrain forklift operators be trained according to OSHA 29 CFR 1910.178 (1).